Circular embroidery attachment # 83 lets you embroider unusual and decorative circles or semicircles. The attachment is screwed to the free-arm. The center of rotation can be either to the right or left of the needle, with the attaching screw lying flat enough to allow the fabric to feed smoothly over it. A diameter of between 3 and 10 inches (7.5 and 25 cm) can be set on the slide.

The fabric must be properly reinforced for circular embroidery, so 2-3 layers of stabilizer should be placed under your project. The fabric is put onto the pin at the center of the desired circle and held in place with a rubber cap to prevent shifting during sewing. The Circular embroidery attachment can be used in conjunction with various presser feet, and will enable you to sew circles with any decorative stitches you wish, and even arrange lettering in a circle.

Order the Circular embroidery attachment now, and you too will be able to sew circles of pintucks, cords, and sequins. 

BERNINA Presser feet fits "Old Style" machines:
530, 530, 531, 532, 534, 540, 542, 600 (not deco), 610, 614, 640 (not Artista), 642, 644, 700, 707, 708, 709, 717, 718, 719, 730 (not Artista), 731, 732, 741, 742, 744, 800, 801, 801, 802, 803, 807, 808, 809, 810, 811, 811, 817, 818, 819, 830, 831, 832, 840, 841, 842, 850, 900, 910, 930, 931, 932, 940, 950, 1000, 1001, 1004, 1005, 1006, 1008, 1010, 1011, 1015, 1020, 1030, 1031, 1070, 1080, 1090, 1120, 1130, 1230, 1260, 1530, 1630 

BERNINA Presser feet fits "Classic Style" machines:

100, 120, 125, 130, 135, 140, 145, 150, 153, 155, 160, 163, 165, 170, 180, 185, 190, 200, 210, 215, 217, 220, 230, 240, 330, 350, 380, 430, 435, 440, 450, 530, 550, 560, 580, 630, 640, 710, 730, 750, 780, 820, 830 and 880

BERNINA Presser feet fits "C Style" machines:

These are coded feet for 9 mm wide zig zag machines.

BERNINA Presser feet fits "D Style" machines:

These are coded feet for new 7 & 8 series machines that utilize the built in dual feed function.