Loading... Please wait...
  • Image 1

Floriani Wet N Stick Lightweight Tearaway 20" x 10yds FWSG2010

RRP: $55.99 (You save $16.50)

Product Description

Wet N Stick is offered in a tearaway version which comes plain or with one inch grid markings and a Cutaway version in black or white. This remarkable stabilizer is coated with a water activated, silicone based adhesive. It is an alternative to pressure sensitive “sticky” paper products and/or messy spray adhesives. Most home embroiderers have, at some point, experienced problems with peel and stick products gumming up their needles as well as the designs registration not lining up correctly. This happens because they mistake “paper” for stabilizer. The main differences between Wet N Stick and these products are that Floriani’s is a stabilizer not paper and the adhesive doesn’t get sticky residue on the needle. The adhesive on Wet N Stick can be re-activated multiple times for easy re-positioning of garments.  Use Wet N Stick Cut away when you need to stick down a sweater knit or a bulky stretch garment such as a sweatshirt, chenille or fleece pullover. It is important to use a “cut away” stabilizer on non-stable fabrics such as knit for the best embroidery results.

  • Perfect for bulky items such as towels, robes and blankets
  • Use for fabrics and garments that get “hoop burn”
  • Use for hard to hoop items such as napkin corners, collars, cuffs, etc.
  • One layer of the tearaway version will support around 8,000 to 10,000 stitches on an average
    size, well digitized design (Cutaway 14,000)
  • The adhesive can be re-activated several times

To use Floriani Wet N StickTearaway:

  • Hoop one layer of the stabilizer, adhesive side up. Be sure the product is taut within the hoop.
  • If using Wet N Stick with a grid, line the grid marks up with the lines on your inner hoop.
  • Apply a drop of water onto the stabilizer in each corner of the hoop as well as one in the
    center using a sponge, foam paint brush or envelope sealer (recommended, available at office
    supply stores). Remember that UminimalU water is required to activate the adhesive.
    Using the tip of your finger, smooth the drops of water over the surface of the stabilizer. You
    will feel the adhesive become tacky almost instantly.
  • Press the garment into place and smooth out any wrinkles.
  • Embroider your design. 600 stitches per minute or less is recommended. U*TipU – If the design
    is denser than 8,000 to 10,000 stitches or if it is a poorly digitized design (too many stitches for
    design size), float one layer of Floriani Medium Tearaway under the hooped item for each
    additional 10,000 stitches for added support!
  • Once the design is complete, remove the hoop from your embroidery machine and tear or cut
    away the Wet N Stick stabilizer. If the adhesive is holding on to the garment, reactivate it by
    applying moisture at the glue line. Once the adhesive is re-activated it will release the

Sizes available: 12” x 10 yds, 12” x 25 yds, 15” x 10 yds,
20” x 10 yards (non-gridded only)

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Verify Sewing Machine Warehouse & kneedle.com

Recent Updates

  • Celebrating our 44th Year

    Scott Goodman, 23, opened for business on leap-day, 1976. Gerald Ford was …

  • Hello BIG!

    The new BERNINA  Q20 is here.  This high-quality long-arm quilting …

  • Baby Lock Ovation

    The very best overlock/cover stitch system is in stock and ready for your …

Sign up to our newsletter