Loading... Please wait...
  • Image 1

Floriani Stitch N Wash Fusible 15" x 10yds FSWF1510

RRP: $24.99 (You save $7.50)
Calculated at checkout

Product Description

This 1.5 oz tearaway stabilizer is ideal for airy, open work type embroidery designs on light cottons and linen. It’s unique because it is made up of half soluble and half nonsoluble fibers. By wetting the design once it is complete the stabilizer is easily torn away without distorting stitches or harming any delicate fibers of heirloom quality fabrics. The design will retain the non-soluble part of the stabilizer throughout the life of the garment; keeping the embroidery looking smooth. Any remnants of the stabilizer around the design will wash out in the laundry. Use Stitch N Wash Fusible when doing embroidery on loosely woven versions of the fabrics mentioned above that tend to shift during the hooping and embroidery process. By fusing the Stitch N Wash Fusible  onto the back of the fabric, it will aid in keeping the fabric taut. Stitch N Wash Fusible also eliminates the need for basting or messy spray adhesives.

  • Easy to remove from around delicate embroidery or machine stitching.
  • Won’t shadow through light colored fabrics.
  • Eliminates countless hours of “picking” out stabilizer remnants.
  • Super stable and will support about 8,000 stitches if the design is well-digitized.


To use Stitch N Wash Fusible:

Fuse one layer of the stabilizer on to the back of the garment. Be sure to use a piece at least one inch larger than the outer parameter of the hoop to insure proper stabilization. *Important – Use a low temp (260°F (120°C) Silk Setting)on your iron. Do NOT touch the surface of your iron to the Stitch N Wash Fusible, press from the fabric side or use a press cloth (muslin or cotton).

  • Hoop the garment and stabilizer. Try to achieve “tight as a drum” tension.
  • Embroider the design.  Tip – If the design is denser than 8,000 stitches or if it is a poorly digitized design (too many stitches for design size), float an additional layer of Floriani Stitch N Wash between the hoop and the bed of the machinefor each additional 8,000 stitches for added support!
  • Remove the hoop from the machine and from the garment.
  • Wet around the edge of the design using a sponge, foam paint brush or envelope sealer. Wait about 10 seconds to allow the water to activate the water soluble portion of the stabilizer.
  • Tear away as much of the Stitch N Wash as possible. Stabilizer remnants will wash out in the laundry with a mild detergent and agitation.
  • NOTE: All irons heat differently. The iron temperature given above is a starting point.
    If you find that you are not getting a good fuse, slowly increase your irons temperature
    until you achieve a good bond between the fabric and stabilizer.

    Sizes available: 9” x 10 yds, 9” x 25 yds,
    12” x 10 yds, 12” x 25 yds, 20” x 10 yds

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review

Verify Sewing Machine Warehouse & kneedle.com

Recent Updates

  • Celebrating our 44th Year

    Scott Goodman, 23, opened for business on leap-day, 1976. Gerald Ford was …

  • Hello BIG!

    The new BERNINA  Q20 is here.  This high-quality long-arm quilting …

  • Baby Lock Ovation

    The very best overlock/cover stitch system is in stock and ready for your …

Sign up to our newsletter