Floriani Heat N Gone 10" x 25yds FHG25

Use this clear, 100% heat removable film as a topping or stabilizer on all fabrics that can withstand an iron temperature of 300°F (140°C) Cotton Setting. Great when giving a gift and you need instant stabilizer removal or when your fabric cannot withstand moisture.

• Clear and Easy to see through
• Easy to remove
• Embossed backside prevents curling and shifting
• Perfect for fabrics that can’t be wet such as velvet, wool, satin, etc.
• Trace intricate quilt patterns onto Heat N Gone® for an easy guide when free motion quilting or thread painting.
• Prevents loops from sneaking back through on high pile fabrics such as towels and terry cloth.

To use as a topping:

• Place a piece of Heat N Gone on the surface of the hooped item, bumpy side touching the fabric, and secure the outer corners with clear tape to prevent curling.
• Complete the embroidery design.
• Tear away as much of the Heat N Gone as possible.
• Place your heated iron directly on top of the embroidery to remove the excess stabilizer. Be sure your iron temp is at least 300°F (148°C).

To use as a stabilizer:

• Place a piece of Heat N Gone within the hoop with the item to be embroidered. Use a piece at least one inch larger than the outer perimeter of the hoop and place the bumpy side of the stabilizer against the fabric.
• Embroider the design.
• Tear away as much of the Heat N Gone as possible.
• Place your heated iron directly on top of the embroidery to remove the excess stabilizer. Be sure your iron temp is at least 300°F (148°C).
• To clean your iron of any residue, heat the iron up to its highest temperature and move the irons surface back and forth over a wet towel firmly. Iron cleaners such as Dritz and Niagra work also.

Sizes Available: 10” x 10 yds, 10” x 25 yds, 20” x 10 yds

MODEL NUMBER: FHG25

Our Price: $25.99 $18.19